View CartMy Account / Order StatusHelp

Join our mailing list!

(Your shopping cart is empty)

  Home > Nitrous >

RCP Dry Nitrous Spray Bar & Dry Nitrous Kit
Dry Nitrous Spray Bar for the GSXR 1000 and Hayabusa, ZX-14, ZX10R
Price: $650.00

Quantity in Stock:
Product Code: RCP-SB-FULL-KIT


Choose a Model*:

Choose an Option

RC Performance, LLC
Dry Nitrous Spray Bar & Nitrous Kit.
RC's Performance has addressed some of the issues with other spray bars on the market (nozzle spacing, air flow obstruction, intergrated nozzles) with our new dry nitrous spray bar. This kit will allow for even distribution between all four cylinders. It will easily mount in any 01-14 GSXR 1000 and 99-14 Hayabusa with minimum air flow intrusion. CNC machined from 6061 T6 aluminum for good looks and reduced weight. The GSXR 1000 and Hayabusa spray bars are identical except the GSXR 1000 comes with spacers to help in aligning the spray bar in the air box, the Hayabusa lays flat against the top of the air box. Our new design, incorporates the nozzles into the spray bar. 5 Axis CNC machined from a solid piece of aluminum. RC's Performance Spraybar includes all components to mount and setup our SprayBar after nitrous solenoid, (you provide) or purchase separately.


The Nitrous jet and bottle are attached directly to the NX Lightening Series Solenoid for a clean installation. Nitrous Line is installed directly into the airbox to supply a Nitrous Vapor that passes right through the air filters. Extra fuel will need to be added via a Power Commander or similar device.

There is not a nozzle in this dry kit. This kit has the nitrous jet mounted by the solenoid, so a nozzle to hold the jet is not required. You just stick the line through a hole into the air box.

Installs in less than 2 hours

RC's Performance now offers the spraybar for the Kawasaki ZX-14 06-14, ZX14R and ZX10R 04-14,

Note: ZX10R may require short center velocity stacks for proper spraybar orientaion.

Kit includes:
  • Instructions
  • Spray bar assembly with intergrated nozzles
  • Eight (8) 1/8" push fittings
  • Shower head
  • 1/8" poly line
  • 3an Flare Jet Fitting
  • Jets (3) #28,#36,#40 other sizes available separately
  • -3AN coupler (solenoid to shower head connector)Mounting bolts
  • 1 lb. bottle(2lb & 2.5lb)
  • Lightening Series Solenoid(Pulsoid Solenoid available for added cost)
  • -4AN Stainless Steel 3FT Hose
  • Wiring
  • Switch

Nozzles are CNC machined into the spray bar.
Dry Nitrous Spray Bar Intergrated Nozzles
Dry Nitrous Spray bar Intergrated Nozzle
Dry Nitrous Spray Bar Lightening Pockets
Dry Nitrous Spray Bar spray pattern GSXR 1000
Flare jet install in between the shower head and the -3an nitrous line
Flare Jet Install Pic
ZX14R install

Average Customer Review: 5 of 5 Total Reviews: 1 Write a review.

Accessories for this product...
Progressive Nitrous Controller Two Dial
Price: $259.95

Progressive Nitrous Controller Two Dial
Heavy Duty Valve Springs
Price: $149.95

Heavy Duty Valve Springs for the Suzuki GSXR 1000, Hayabusa, ZX12R and KAWASAKI ZX14R

  0 of 0 people found the following review helpful:
RC's Nitrous spray June 11, 2012
Reviewer: Jim fowler from Pheonix, United States  
Installing only took about 2 hrs, made 50 HP with the 36 jet on my 2012 ZX14R, ****very pleased****

Was this review helpful to you?

Browse for more products in the same category as this item:

Nitrous > Nitrous Systems
14961 Rea Magnet Rd.
Laurinburg, NC 28352
 About Us
 Privacy Policy
 Send Us Feedback