View CartMy Account / Order StatusHelp
 

Join our mailing list!





(Your shopping cart is empty)

  Home > Air Shifter > Engine & Fuel Kill Controls >

Raptor Quick Kill
Raptor Quick Kill
 
Price: $219.95

Quantity in Stock:2
Availability:: Usually Ships in 24 Hours
Product Code: RQKSHIFT

Description
 
Raptor Quick Kill

***Perfect for a auto transmission bikes: 1-2, 1-3, 1-4 autos where somes gears need no kill***

Raptor "Quick-Kill", allows for full throttle, clutch-less up shifts with air shifters on motorcycles. The Quick-Kill interrupts or "kills" the fuel injectors for a split second, allowing the transmission to up shift effortlessly for smooth, quick shifts. Can be programmed with or without a gear position sensor. Bikes that are equipped with a analog (usually 3 wire) gear position sensor, can take advantage of programming the Quick-Kill with different kill times per gear.

-All digital, microprocessor based design. No slow relays to wear out from arcing across contacts.

-Controls 4 or 8 injectors. Can also kill power feed to the ignition coils for carbureted bikes.

-Kill times are adjustable in 1 mSec (milli-second) increments from 0 mSec to 100 mSec. Having the ability to program 0 mSec is a benefit for bikes with auto transmissions that don't require kill times in the lower gears but may require some kill in the upper gears.

-Delay time adjustment: once the shift is initiated, a programmable delay to allow time for the air solenoid to open and pressurize the air ram cylinder before the kill event occurs (from 0 mSec to 100 mSec).

-Keypad and digital displays for easy adjustments. Allows programming of exact delay and kill times.

-Delay and kill event LED indicators on keypad.

-The Quick kill displays current gear and current kill time for that gear.

-Initial setup "Learn mode" for setting up gear based bikes and learning gear position sensor voltages. Only need to do this once and values stored in memory for that bike.

-Small size (2.5" L x 2.5" W) (0.9" height).

-Quick disconnect locking connector.

-Non volatile memory (remembers settings when power is removed).

-Can use horn button to initiate shift or use the Raptor Dual Mode Shift Light with Autoshift, to trigger the Quick Kill for Auto Shifting.

-Electronics are potted for resistance to moisture and vibration.

Raptor Quick Kill

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Air Shifter > Engine & Fuel Kill Controls
RCsPerformanceOnline.com
14961 Rea Magnet Rd.
Laurinburg, NC 28352
 About Us
 Privacy Policy
 Send Us Feedback