View CartMy Account / Order StatusHelp
 

Join our mailing list!





(Your shopping cart is empty)

  Home > Kawasaki >

RCP CNC Head Porting Service - ZX12R
RC's Performance CNC Ported Heads, GSXR 1000, Hayabusa, ZX-12R
 
Price: $1,000.00

Product Code: RCS ZX12R CNC PORTED HEAD

Description
 
RC's Performance CNC Head
RC's Performance 5 Axis CNC Ported Head
RC's has done it again: produced a mega Horse Power producing 5 axis cnc head with perfect port geometry.
We have a cnc head for stock bore motors to all out stroker motors.
We need your head as a core.
ZX12R KAWASAKI 2000-2005
CNC Ported Stock Valve Head
$1000
CNC Ported w/Stainless Steel Exhaust Valves $1500
CNC Ported w/1mm Oversized Stainless Steel Intake Valves
$1500
CNC Ported Grudge Head w/1mm Oversized Stainless Steel Intake and Exhaust Valves
$2000
CNC Ported Grudge Head w/1mm Oversized Titanium Intake and Stainless Steel Exhaust Valves
$2800
OPTIONS
Heavy Duty Valve Springs $150
Bronze Valve Seats Installed on Intake $400
Sink Valve Guides on Intake $80
Clearance Cam Journal Cap $75
OPTIONS
Heavy Duty Valve Springs $150
Bronze Valve Seats Installed on Intake $400
Sink Valve Guides on Intake $80
Clearance Cam Journal Cap $75
OPTIONS explained.....
Heavy Duty Valve Springs: Heavy duty valve springs are a safety measure against floating a valve or spitting a shim. Major engine damage can occur if too weak of a spring is used. We suggest upgrading to heavy duty valve springs in all nitrous applications or if you are upgrading to a high lift cam.
Bronze Valve Seats: Bronze valve seats are used to help avoid premature wear on the valve face of Stainless Steel and Titanium valves. The stock Stellite valve seats are much more abrasive to the valve face. Utilizing the Bronze valve seats prolong the life of exotic valve materials such as Inconel, Stainless, and Titanium.
Sink Valve Guides: When using a high lift cam such as a .415" or larger, contact issues between the valve spring retainer and the valve seal can occur. Sinking the valve guide gives the retainer more clearance.
Clearance Cam Journal Caps: When using a high lift cam (.430" and larger), your cam journal caps will need to be clearanced so the lobes do not come in contact with the cam caps. Damage could be as minor as small cam wear or as drastic as catastrophic engine failure.
To view an animation of our 5 Axis CNC Ported Heads and learn more about them.....

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Kawasaki
RCP CNC Parts
RCP Head Porting and Machining
Kawasaki > ZX12R Kawasaki
RCsPerformanceOnline.com
14961 Rea Magnet Rd.
Laurinburg, NC 28352
 About Us
 Privacy Policy
 Send Us Feedback