View CartMy Account / Order StatusHelp
 

Join our mailing list!





(Your shopping cart is empty)

  Home > Fuel System > Injectors >

Siemens Deka 60 LB/HR Injectors (Short Style)
Siemens Deka 60 LB/HR Injectors (Short Style)
 
Price: $450.00

Product Code: DEKA60

Model

Choose a Model*:


 
Description
 
Siemens Deka 60 LB/HR (630cc) Injectors (Short Style) Ultra-Compact, high flow injector at just 48mm end to end! These injectors flow 60 lbs/hr at 43.5 PSI ( 3 BAR ) and up to 85 lbs/hr at 87 PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.

These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.

Engine performance and running quality are enhanced through the optimized spray pattern. Unlike competitors “pencil stream” high flow injectors; these High Flow injectors utilize a multi-orifice tip providing a true 30 degree spray pattern for improved mixture preparation. This results in lower BSFC and better idle quality than many injectors with less flow.

These injectors fit the following models:

GSXR1000-------------- 2003-2006

GEN I Hayabusa ------1999-2007 (includes adaptor top hat)

Features:
Genuine, reliable Siemens Injectors
Excellent response characteristics
Robust Design
High Impedance
Low Impedance performance characteristics with High Impedance Compatibility

Specifications:
Coil Resistance: 12.5 Ohms / High Impedance / High-Z (No ECM driver modifications required)
Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 60 lb/hr = 630 cc/min = 453 g/min
Static Flow Rate @ 87PSI ( 600kPa ) w/Gas: 85.7 lb/hr = 900 cc/min = 648 g/min
Gain: 0.11ms/mg
Offset: 0.055ms
Turn on time @ 14VDC: 1.14ms
Turn off time: 0.85ms @ 600KPa
Connector: Bosch EV1
Series: DEKA 4 ( DEKA IV )
Orifice Type: Multi-orifice
Spray Pattern: 30 Degree Spray Cone
Factory fitted with Viton upper and lower o-rings
48mm end to end

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Fuel System > Injectors
Fuel System
RCsPerformanceOnline.com
14961 Rea Magnet Rd.
Laurinburg, NC 28352
 About Us
 Privacy Policy
 Send Us Feedback